Power Curbers - 440 XL Extruder

440-XL Extruder

Small asphalt or concrete curb at speeds up to 30' (9.15m) per minute

With more horsepower, the 440-XL extrudes curb up to 18" (45 cm) W and 12" H (30 cm) at a speed up to 30' (9.15 m) per minute on the left side. The higher speed allows for quicker discharge from the concrete truck and less standby time.

A single 6" (15 cm) diameter auger is standard. Optional twin augers increase speed for larger curb-and-gutter applications. Steel reinforcing rod can be fed through the front of the machine directly into the curb through a hollow auger shaft. Two dual, pneumatic front tire assemblies (4 tires) provide for greater flotation in compacted stone, base course, or finished asphalt applications. Wheels adjust vertically and horizontally for compaction and placement of tack coat or steel rebar in the curb. The 440-XL can be fed from a wheelbarrow, concrete truck, or AL-120 Tailgate Loader.

440 XL Specifications
Engine	25 hp, electric start (18.4 kW) at 3600 rpm
Length, with Handle	93" (236 cm)
Width	32" (81.2 cm)
Height	39" @ 2" Post (99.2 cm @ 5.1 cm Post)
Weight	1,200 pounds (544 kg)
Paving Width (max)	18" (45 cm)
Paving Height (max)	12" (30 cm)
Auger Diameter (standard)	6" (15 cm)
Auger Diameter (optional)	5" (12.5 cm)
Radius (min.)	48" (120 cm)
Paving Speed up to	30'/min (9.15 m/min)