Power Pavers SF-2700 Series Concrete Slipform Paver
DIESEL ENGINE
Cummins QSB5.9 Six cylinder, 4-stoke 215 hp @ 2,200 rpm (160 kw) Displacement: 12-volt electric starting system with 95 amp alternator
TRACK DRIVE SYSTEM
Two heavy duty 12’(3.66m) track systems, with 12” (30.48cm) wide, triple grouser steel track pads. Track components with sealed links, 9 roller track frame lifetime lubricated rollers, grease gun type hydraulic track tension adjustment.
Paving speeds....0-18 fpm (5.49 mpm)
Travel speeds.....0-36 fpm (10.97 mpm)
Side clearance (distance from edge of slab to outer most portion of track) 27” (69.56cm) with standard two speed motors.
POWER DRIVE SYSTEM
Engine flywheel mounted pump drive gear box with hydraulic pumps flange-mounted and spline shaft engaged
Variable volume pressure compensated pump for vibrator system; maximum of 64 gallons per minute (242.26 liters per minute)
Two each, tandem stack pump arrangements
Speed controlled functions remain at set flow rate regardless of changes in working load pressure for smooth, even extrusion of concrete
HYDRAULIC OIL AND FILTRATION
275 Gallon (1040.97 liters) main hydraulic reservoir with visual fluid indicator
Filtration system with three sump filters and three 10 micron spin-on filters
Inline filters on sensors
WATER SYSTEM
Hydraulically driven 4 gpm (15.14-lpm) pump delivers 2000 psi (544.3 kpa) water for clean-up and utility use
Water storage capacity two 110 gallon (416.35 liters) tanks
GRADE CONTROL
Manual or automatic
Automatic machine elevation by proportional hydraulic controls through hydraulic sensor system and referenced through 4 sensor units
Hardware for dual stringline control (4 corners) or “lock to grade” referencing
STEERING
Operator selection of manual or automatic control
Counter rotation of crawler tracks possible in manual mode
Fully proportional sensing system for automatic steering control from grade reference
Plumbing is provided for right hand or left hand steering reference
Optional auto reverse available
SPREADER AUGER
16” (40.64cm) Diameter split, reversible auger with hard-surfaced flighting
Each side individually speed controlled driven by constant volume, heavy-duty hydraulic motor
Adjustable height
HYDRAULIC STRIKE-OFF
Operator controlled for metering concrete flow to enclosed vibrator and tamper section in front of profile pan
Sections telescope for width adjustment
HYDRAULIC VIBRATORS
2.25” (5.7cm) Diameter head hydraulic “L” shaped paving vibrators with individual pressure compensated controls (up to 20 controls)
Standard machine features 16 hydraulic internal vibrators with individual pressure compensated flow control valves located at the console (up to 20 vibrators maximum)
Vertical adjustment is operator controlled through hydraulic power lift system
Removable baffle plates between vibrators for use on supers
PROFILE PAN
46” (1.17m) Profile pan with power crown for straight (roof top) crown configurations
Profile pan automatically adjusts for grade variations up to 18” (45.72cm) during the paving process
End pan over-build to compensate for edge slump
Profile pan, tracks, and sideforms automatically adjust from running with both tracks on the ground to one or both tracks running on adjacent slab without modification
Curb mold inserts can be installed quickly on either or both sides
PAVING DIMENSIONS
|
Paving Depth
|
0-16”(40.64cm)
|
|
Paving Width
|
12’ (3.66m) to 27’ (8.23m)
|
|
Optional Paving Width
|
Up to 32’ (9.75m)
|
|
Overall Width
|
54” (1.37m) wider than paving width
|
|
Paving Length
|
16’ (4.88m)
|
|
Weight
|
48,000 lbs. (21,772 kg) to 50,000 lbs. (22,679 kg)
|
TRANSPORTATION DIMENSIONS
|
Width—assembled
|
12‘ (3.66m)
|
|
Width—tracks off
|
8’-6” (2.59m)
|
|
Height
|
7’-10” (2.39m)
|
|
Length
|
54” (137cm) longer than paving width
|
SERVICE REFILL CAPACITY
|
|
Liters
|
Gallons
|
|
Fuel Tank
|
359.6
|
95
|
|
Engine Oil
|
22.4
|
5.92
|
|
Engine Coolant
|
62.46
|
16.5
|
OPTIONAL EQUIPMENT
Extension kit to 32’(9.75m)
Additional hydraulic vibrators
Four bank vibrator control manifolds
Curb molds
Continuous keyway inserter (per side)
Male sideform key (per side)
Center bar inserter
Manual side bar inserter (per side)
One speed track motors
Hydraulic belt finisher
14’(4.27m) tracks—instead of standard 12’(3.66m)