Power Curbers Testimonials
Good News from Power Curbers Customers
5700-C
"We fill up the auger and then slide the machine to transport mode to get to those tight spots."
Chad Gordon, Pember Excavating, Menomonie, WI
5700-C
"The auger is a better way to deliver the mix to the hopper. I remember a lot of headaches with the belt."
Lewis Robertson, Robertson Grading Inc., Evans, GA
5700-C
"The best thing is the auger. We save about 8 minutes on a truck. You multiply that out and realize we can do much more work in a day."
Ron Lamontagne, Ciments Lavallee Ltd., Laval, QC
5700-C
"We had problems trimming and pouring at the same time" with a competitive machine. The machine just didn’t have the hydraulic power. Now, (with the Power Curber), if it’s within 1, 2 or 3 inches (25mm, 50mm, 75mm), I don’t have to pre-trim. It saves fuel and time."
William Irving, Virginia Site Concepts, Richmond, VA
5700-C
"With higher sub-grade, you don’t have to worry. That trimmer is going to trim right through it."
Troy Reighter, Cougar Contracting Specialities, Ft. Myers, FL
5700-C
"Offsetting the mold saves a lot of time with rehab."
Tim Adleta, Adleta Construction, Lockland, OH
5700-C
"In the downtown area, there are a lot of obstacles. Every road is done differently. The versatility of the machine, especially the hydraulics (shifting vertically and horizontally) is what attracted me to the machine."
John Sansalone, Domti Engineering & Construction, Bolton, Ontario
5700-C
"That wash-down saves the operator a lot of time."
Bruno Rocca, Cross Can Construction, Ltd., Woodbridge, Ontario
5700-C
"Power Curbers does a good job redesigning the machine, while keeping in mind the contractor will be using existing molds."
Jay Shorette, Dirigo Slipform, Hampden, ME
5700-C
"The horsepower is an advantage with monolithic curb, gutter and sidewalk. "With the other machine, we were maxed out. This one's got the horsepower to do anything we want to do."
Dan Hite, Doug McCoy Construction, Twin Falls, Idaho
5700-C
"It has get-up-and-go and we can get an extra 1,500 to 2,000 feet a day. Once everything is set up and going, I can run faster with the Power Curber than (the competition). When everything is going good, I can empty the truck out in 8 to 10 minutes and never stop the machine. That's where we get our footage."
Rodney Suggs, Deco, Rogers, Arkansas
5700-C
"The engine's quiet enough (that you can) talk on your cell phone while running the machine. You can't keep everybody moving, if you can't communicate."
Eddie Campbell, Campbell's Concrete, Floyds Knob, IN
5700-C
"The Cummins engine is easier to get parts and service. The Power Curber is as good as it gets. It's just a better design."
Chris Handy, Custom Curb and Edging, Arlington, TN
5700-C
"It's safer and a real big improvement. In some areas, you wouldn't be able to take the machine in (without this). Loading from the front really impressed me." (He’s referring to our swivel chute and single lane pour capability.)
Tony Oliveira, AJO Concrete Construction, Baltimore City, MD
5700-C
"I can't believe I ever owned a machine without this Quick Connect."
Bryan Lusk, Wilson Brothers Construction, Honea Path, SC
5700-C
"The Quick Connect has really been a time saver."
E.B. Webb, S.T. Wooten, Wilson, NC
5700-C
"We can change the mold on the Power Curber quickly. (The competitor's) machine took two men about two hours to set up for a different pour."
Andy Foster, APAC, Asheville, NC
5700-C
"Whoever came up with the Quick Connect is a genius. It's so easy. I wouldn't buy a machine without the Quick Connect, we change the mold out in 5 minutes, it's such a bummer changing molds the old way: Everybody is waiting on you."
Ernie Meritt, Concrete Express, Denver, CO
5700-C
"Before, it took two men, plus me, to do a transition from holding curb to spilling. One had to adjust each sensor and another man was dialing to change the pitch on the machine. The micro automatically recalibrates the sensor. Now, I can do it alone from the operator's platform."
Bryan Lusk, Wilson Brothers Construction, Honea Path, SC