Power Curber
150 Extruder

• The 150 features an electric start with the throttle control mounted on the steering handle for easy access from the front of the machine
• The steering handle ensures smooth control and easy guidance of the machine from the left- or right-hand position

• The 9 pneumatic tires and 3 lifting jacks make steering and adjusting on the job easy to do
• For pouring over an adhesive or for inserting rebar, simply shift the front wheels to the side

• The 150 can handle molds up to 12” (30 cm) wide and 12” (30 cm) tall
• Choose from one of our stock profiles or contact our mold engineers to customize a mold to meet your requirements

Type: Honda GX630R, 4-cycle air-cooled, electric start

Power: 20.8 hp (15.5 kW) @ 3600 rpm

Optional: Honda GX390, 4-cycle air-cooled, recoil start

Power: 11.7 hp (8.7 kW) @ 3600 rpm

• Centrifugal clutch with V-belt drive and chain-driven auger
• Single auger drive with compaction chamber

• High-flotation design with 9 pneumatic tires and 3 lifting jacks

Option: Hard rubber wheels in lieu of pneumatic tires

• 6” hollow-shaft steel auger with 5/8” interior dimension
• Can be used for feeding longitudinal rebar through the mold (3/8” [10 mm] maximum rebar diameter)

Options: 5” hollow-shaft steel auger, for small profile molds; 6” cast auger (solid shaft). Spare augers available in all sizes.

• 1 curb mold included

Option: Extra molds available

Paving Speed (Maximum):

• 20.8 hp (15.5 kW): 25 feet/minute (7.6 m/min)
• 11.7 hp (8.7 kW): 15 feet/minute (4.6 m/min)

Curb Width: 12” (30 cm) maximum

Curb Height: 12” (30 cm) maximum

Clearance: Within 1” (2.5 cm) of obstructions

Radius (minimum): 24” (60 cm)

• 4 cubic feet (0.1 cubic meters)

• Length: 6’ 4.5” (1.94 m) with steering handle upright (8’ 5” [2.57 m] with steering handle in the brake position)
• Width: 30” (76 cm)
• Height: 32.5” (83 cm)
• Weight
  • 20.8 hp (15.5 kW): 950 lb (431 kg)
  • 11.7 hp (8.7 kW): 800 lb (363 kg)

Dual-side Pouring: Second mold, auger, housing, compaction chamber, and shaft for left- or right-side extrusion

Under Guardrail Pouring: Offsets the mold, auger housing, and compaction chamber to pour underneath an existing guardrail. Consult factory for specific applications.