Power Paver
SF-2700 Slipform Paver

• Manual or automatic

• Manual or automatic
• Counter rotation in manual mode
• Fully proportional sensing system for automatic steering control
• Electrical connections for right-hand or left-hand steering reference

• Master switch for synchronized start and stop of all paving functions
• Engine controls and monitoring devices

• Operator controlled for metering concrete flow to the enclosed vibrator and tamper bar chamber in front of profile pan
• Sections telescope for width adjustment
• Adjustable height

• Rated at 10,000 rpm at 4 gal/min (15.14 L/min)
• Twelve vibrators standard with individual pressure-compensated flow control valves
• Operator-controlled hydraulic vertical lift
• Removable baffle plates between vibrators for use on super elevations

• 46 in (1.2 m) long with power crown
• Over-built edges to compensate for edge slump
• Tracks and side forms adjust for running with both tracks on the ground, or one or both tracks on an adjacent slab
• Curb mold inserts installed quickly one either or both sides
• Sharp, square trailing edge for a better finish

• Hydraulically powered tamper bar with operator-controlled speed
• Staggered, double tamper bar arrangement to prevent “crusting in the vibration chamber

• 32” (81.3 cm) high side forms for containing enough concrete during deep pours

Enables paver to integrate with systems from Trimble, Topcon, or Leica for 3D/stringless machine control (3D systems sold separately from the respective company)

Available in different widths, these kits can expand the paving width to a maximum of 32 ft (9.75 m)

Available for individual purchase for replacements or extended-width pours

Consult factory. Offers more utility when needed

Made to order for one or both sides of the paving pan

For accurately-placed tie bars into the center of the slab

For accurately-placed tie bars in wide pours

Available in both manual and hydraulic configurations, these place side bars into the slab before the concrete exits the paving pan

Belt finisher reduces manual work

Final finisher minimizes manual float work

Evenly mists slab with water directly behind the paving pan

Reduces manual adjustments

Bright, high-efficiency LED lighting added as needed

Allows monitoring and more precise control of individual vibrator frequencies

• Tier 3, 6-cylinder, 4-stroke Cummins QSB6.7 220 hp (164 kW) @ 2,200 rpm Where emmissions standards allow OR
• Tier 4, 6-cylinder, 4-stroke Cummins QSB6.7 225 hp (166 kW) @ 2,200 rpm
• Electric: 12 V electric starting system with 160 A alternator
• Fuel Tank Capacity: 95 gal (432 L)
• Engine Oil: 15 qt. (17 L)
• Fuel Economy: 10.79 gal/h (40.84 L/h) at 80% of rated hp (kW)

• Paving Depth: Consult factory for depths greater than 16 in (406 mm)
• Paving Width: 12 ft (3.5 m) to 27 ft (7.3 m)
• Optional Paving Width: Up to 32 ft (10 m)
• Overall Width: 52 in (1.32 m) wider than paving width
• Length: 16 ft (4.88 m)
• Weight: 48,000 lb (21,772 kg) to 50,000 lb (22,679 kg)

• Width (Assembled): 12 ft (3.66 m)
• Width (Tracks Off): 8 ft, 6 in (2.59 m)
• Height: 7 ft, 10 in (2.39 m)

• Two tanks for a total of 220 gal (832.79 L)
• Hydraulically driven 4 gal/min (15.141 L/min) pump delivers 2,000 psi (13,790 kPa) for clean-up and utility

• Paving Speed: 0-37 ft/min (0-11.28 m/min)
• 2 heavy-duty, 12 ft (3.66 m) track systems with 12 in wide (30.48 cm) triple grouser steel trackpads
• Track components with sealed links, 8-roller track frame, lifetime-lubricated rollers, grease gun-type hydraulic track tension adjustment
• Triple-reduction, 138:1 track drive for super-smooth travel at slow speed
• Side clearance (edge of slab to outer portion of track): 26 in (66 cm)

Sturdy box frame 39 in deep (99.06 cm) with 0.5 in plating (12.7 mm) for increased rigidity

• Engine flywheel mounted pump drive gearbox with hydraulic pumps flange-mounted and spline-shaft engaged
• Variable-volume, pressure-compensated pumps for vibrator and machine system
• Machine pump: Maximum 45 gal/min (170.3 L/min)
• Vibrator pump: Maximum 65 gal/min (246.1 L/min)
• Speed controlled functions remain at set flow rate regardless of changes in working load pressure, for smooth, even extrusion of concrete

• 275 gal (1040.97 L) main hydraulic reservoir with visual fluid indicator
• Filtration system with three suction strainers and three 10 μm spin-on filters

• 16 in (40.64 cm) diameter split, reversible auger with hard-surfaced flighting
• Each side is independently drive by a constant-volume, heavy-duty 29.9 in^3 (489.97 cm^3) hydraulic motor with a 3.27:1 reduction