Power Curbers 5700 SUPER B number one selling curb and gutter machine

#1 Selling Curb and Gutter Machine in the World

This powerful machine was recently replaced by the 5700-SUPER-B. The outstanding versatility to move from curb and gutter to barrier/parapet, sidewalks, golf and bike paths (center-pour position), stadium risers, and irrigation ditches is also in the original 5700-B. All applications are concrete. A popular feature, the Cast Auger Conveyor, increases mixing power, speeding up pours. The auger is fully enclosed and holds enough concrete to get through a tight radius. That saves time and trouble dealing with the ready-mix truck. The optional Quick Connect Mold Mounting System allows molds to be changed in a few minutes. The machine can pick up any new or modified Power Curber curb and gutter or barrier mold, and with turnbuckles added, any sidewalk mold. The 5700-B transports at legal highway width in the USA.

•Belt Conveyor, 10' long (3.05m) with 2' (.6m) hydraulic cylinder for raising and lowering
•Trimmer adjusts hydraulically vertically and horizontally (16 inches each, 41cm) to allow work around tight radius and below grade
•Adjustable Offset allows vertical or lateral shifting of the mold for pouring below grade, adjacent to pavement or at the edge of rough-cut asphalt
•Hydraulically Extendable Third Leg provides added stability for tight radius work
•Machine transports at legal highway width without disassembly
•Pours curb and gutter, sidewalk, standard barrier wall

Engine
Type: 4-cylinder/4-stroke, low vibration, Deutz diesel
Horsepower: 88 @ 2500 rpm (66 kw)
Fuel tank capacity: 30 gallons (114 liters)
Fuel consumption: 3.0 gallons/hour (11.4 liters/hour)

Performance
Maximum sidewalk width: 6-foot offset (1.83 m) or 8-foot center pour (2.44 m)
Maximum barrier/parapet height: 48 inches (122 cm)
Turning radius : 2 feet (60 cm)
Post extension: 36 inches (91cm)
Hydraulic tank capacity: 50 gallons (189 liters)
Speed: Travel: 0 to 75 feet/minute (0 to 23 m/minute)
Pouring : 0 to 50 feet/minute (0 to 15 m/minute)
Auger capacity: .9 cubic yards (.69 cubic m) up to 2.5 cubic yards (1.9 cubic m)/minute
Auger conveyor improves concrete consistency

Standard Equipment
Tracks: 12 inches (30 cm) wide
Auger conveyor: 144 inches (3.7 meters) 24-inch (61 cm) hydraulic cylinder shift
Mold: Up to 32 inches (81 cm) wide
Hydraulic Right Rear Extension: 24 inches (61 cm) hydraulic
On-board water system: (1200 psi) 75 gallon (284 liters)
Vibrator circuits: 6
Hydraulic vibrators: 2
Proportional electronic controls
Quick release hopper
Hydraulic Adjustable Offset

Optional Equipment
• Carbide tooth trimmer
• Hydraulic adjustable offset with " cushion mount"
• Median barrier/bridge parapet kit
• Median barrier/bridge parapet molds up to 48 inches (122 cm) high
• Sidewalk kit
• Sidewalk molds up to 72 inches (183 cm) wide
• Driveway block out
• String line kit
• Joint cutting tools
• Belt conveyor
• Spare parts kit
• Quick Connect Mold Mount System
• Front grade steering sensor

With our Quick-Connect Mold Mount System Option you can change molds hydraulically in only a few minutes without heavy hand work. This saves as much as 30 minutes or more per mold change!

"The Quick Connect is the best option we bought on our machine. It allows us to change molds without having to stop the concrete truck. It's that quick."—Mike Freeman
Carolina Curb & Gutter, Wilmington, NC
Trimmer Dimensions
Standard cutting width: 42 inches (107 cm)
Optional cutting width: Up to 78 inches (198 cm)
Cutter head diameter: 21
inches (53 cm)
Maximum trim depth: 6 inches (15 cm)
Lateral shifting: 80 inches (203 cm)
Vertical shifting: 24 inches (61cm)

Overall Dimensions
Total length: 210 inches (5.4 m)
Transport width: 102 inches (2.5m)
Height: 102 inches (260 cm)
Net weight: 23,500 pounds (10,659 kilograms)

See the 5700 SUPER B in action. | Broadband (High)

| Dial-up (Low)

|

"It's unimaginable how much the machine increased our production. We were probably doing 10,000 to 20,000 feet a year by hand. Now. we're up to 100,000 to 150,000 feet a year."-Bob Engelman, Engelman Construction Inc., Macungie, PA