5700-C Specs

Optional accessories shown in Red.

Slipform Paving

Curb/Sidewalk:Maximum 7’ (2m) wide in the offset position or 10’ (3m) in the center pour position. Maximum 8’ (2.5m) wide offset or 14’ (4m) center pour with MAX Package.
Barrier/Parapet: Maximum 5’ (1.5m) tall or 8’ (2.5m) with MAX Package.
Mold: One, up to 32” (813mm) wide, with quick release, interchangeable hopper is standard.


Type: Cummins QSB4.5-130C diesel4-cylinder/4-stroke, turbo charged, Tier III emissions compliant.
Power: 130 HP (97kW) @ 2400 RPM
Option: Engine Mounted Air Compressor for clean-up or air operated hand-tools.

Service Capacities

Fuel Tank: 66 gallons (250 liters)
Hydraulic Tank: 50 gallons (189 liters)


Smart Amps™: Digital amplifiers provide electronic over hydraulic control for grade, forward and reverse steering, and slope.
Features: Adjustment for sensitivity and dead-band offering the operator accuracy and feel, without complexity; self diagnostics; and automatic shut-off for sensors that leave the stringline.
Convenience & Safety: Synchronized ON/OFF for vibrators & crawlers. Five Emergency-Stop switches and a Horn for operator and chute man.
Option: Networked Digital Control with auto-slope, cruise control, 3-D readiness, advanced set-up flexibility, and a large graphic display.


Cutting Width: 42” (1070mm); up to 78” (1980mm) with optional extensions. Carbide teeth.
Cutting Head Diameter: 21” (530mm)
Maximum Trim Depth: 6” (150mm)
Lateral Shift: 80” (2030mm) hydraulically.
Vertical Shift: 25” (635mm); 16” (406mm) hydraulically, 9” (228mm) mechanically.
Options: Trimmer Extensions in 6” (152mm), 12” (305mm), and 24” (610mm) widths.

Auger Conveyor

Drive: Direct drive with high torque motor; variable speed and reversible.
Volume: 1 yd³ (3/4 m³) capacity and 0-2 yd³/min (0-1.5m³/min) rate of movement.
Positioning: Pivots, hydraulically tilts and slides 24” (610mm). Discharge chute swivels providing additional flexibility in set-up.
Size: 12’ (3.7m) long and 14” (356mm) diameter.
Features: Heavy duty cast flighting with lid for full enclosure.


Vibrator Circuits: Six hydraulic circuits with variable speed and independent control.
Vibrators: Two, with adjustable mounts.
Options: Extra vibrator(s) with hanger and extra vibrator circuits (three).

Hydraulic Adjustable Offset

Lateral Shift: 24” (610mm) hydraulically with positive mechanical locking.
Vertical Shift: 25” (635mm); 16” (406mm) hydraulically, 9” (228mm) mechanically.
Option: Hydraulic Mold Offset Lock

Water System

Washer: 2,000 psi (138 bar or 13.8Mpa) high pressure system with trigger control and adjustable spray nozzle.
Tank: Stainless steel with 132 gallons (500 liters) capacity.
Options: Low Pressure system, Mold Misting kit, Charge Hopper Water kit, and Auxiliary Water Tank, 92 gallons (348 liters).

Crawlers & Elevation Posts

Type: Three hydraulically powered crawler tracks with planetary gear reduction.
Tracks: 12” (305mm) wide steel pads.
Speed: Travel at 0 – 110’/min (33.5m/min)
0 – 70’/min (21m/min) with MAX Package
Pouring at 0 – 50’/min (15m/min)
0 – 35’/min (10.5m/min) with MAX Package
Minimum Turning Radius: Left at 2’ (610mm) Right at 20’ (6.1m)
Post Extension: 36” (914mm) hydraulic cylinders.
Straddle Leg: 22” (559mm) of hydraulic side shift adjustment.
Options: Polyurethane Track Pads and All Crawler Steering (which requires optional Networked Digital Controls).

Optional Equipment

Quick Connect Mold Mount: Hydraulically operated.
Hydraulic Front Grade Sensor Arm: In operator controlled and automatic versions.
Dual Side Pouring: Allows you to pour from either the left or right side.
Light Kit: Four post mounted spot lights.
Barrier Mold Lift: Hydraulically operated, with 24” (610mm) lift, independent of the machine’s post extension.
Weight Pod: 1,980 lbs. (900kg).
Post Hole Digger: 12” (305mm) auger diameter. Maximum hole depth is 34” (864mm). Requires optional Quick Connect Mold Mount.
Center Pour Paving Kit: Available in several widths and configurations.
Stringline Accessories: Stakes, rods, clamps, string, radius materials, winches, etc., available individually or in kits.

Net Weight

Machine: 24,700 lbs. (11,200kg)Weight is approximate and will vary depending on optional accessories and size of mold.
Full Water Tank: Add 1,100 lbs. (500kg)
Full Fuel Tank: Add 480 lbs. (215kg)
Quick Connect: Add 750 lbs. (340kg)
Dual Side Pouring: Add 600 lbs. (270kg)
MAX Package: Add 2,400 lbs. (1,090kg)

Transport Dimensions

Length: 20’ (6.1m)
Width: 8’ 6” (2.6m)
Height: 10’ 7” (3.2m)
8’ 1” (2.5m) without exhaust stack.
Add 5” (127mm) for MAX Package.